Clearblue Pregnancy Test Rapid detection 1 Test
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getAggregateRating, 7.51ms
- REVIEWS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned;
Description
CLEARBLUE
Pregnancy test
Rapid detection
Results in just 1 minute
Medical device
1 test
The Clearblue Rapid Detection Pregnancy Test is designed to be as easy to use as possible, meeting your expectations for the precision that is the hallmark of the Clearblue brand. Its revolutionary design is the result of in-depth research into women's needs.
Greater than 99%2 reliability from the estimated date of menstruation
Ergonomic shape: Easier to handle and more hygienic with a longer, curved handle.
50% wider stem3. Improves aiming of the urine stream.
Colour changing stem improves sample analysis and changes from white to Rose to confirm correct test function.
Easy-to-read results: (+) or (-)
Easy-to-read results4: (+) or (-)
(+) or (-) results are easy to read and are displayed within 3 minutes. A pregnant result may appear within one minute of the test being carried out when the test is carried out from the first day of delay in menstruation (which corresponds to the day following the expected date of your period).
You must wait the full 3 minutes to confirm a "not pregnant" result, or when you carry out a test before your period is late.
How to use it
Before taking the pregnancy test, always read the instructions carefully.
When you are ready to take the test, take the test stick out of its packaging, remove the blue cap and use the test straight away.
Hold the absorbent stick pointing downwards under the stream of urine, or dip it into a urine sample that you have stored in a clean, dry container, for just 5 seconds.
The rod will immediately change colour and turn pink, confirming that it has been impregnated by the urine. Keep the rod in the urine for the full 5 seconds
IMPORTANT
Rod pointing up/downHold the absorbent rod pointing down, or lay the test stick flat while waiting for the result.
Wait 3 minutes. Blue lines will appear as the test progresses.
You can read your result in the results window.
A blue line must be present in the control window when reading the results. This line indicates that the test was successful.
A "Pregnant" result may appear within a minute of the test being carried out when the test is carried out from the first day of delay in menstruation (which corresponds to the day following the presumed date of your period).
You must wait the full 3 minutes to confirm a "Not Pregnant" result (see question 8). If no blue line appears in the control window, this means that the test did not work (see question 10).
It doesn't matter if one of the lines forming the "+" sign is lighter or darker than the other; the result is "Pregnant".
You should read the result no later than 10 minutes after taking the test. Do not take into account any changes after this time.
Compositions & ingredients
The composition may be subject to variations, so we advise you to always check the list on the purchased product.
1 test
1 A pregnant result may appear within one minute of the test being carried out when the test is carried out from the first day of delay in menstruation (which corresponds to the day following the presumed date of your period). You must wait the full 3 minutes to confirm a "not pregnant" result, or when you perform a test before your period is late.
2 Instructions for use in reference
3 Compared with the previous Clearblue Rapid Detection
4 TOMLINSON et al, Pike J., et al. Expert Opin. Med. Diagn (2013) 7(5):435-441.
Clearblue Rapid Detection is a pregnancy test manufactured by SPD Swiss Precision Diagnostics GmBH and distributed by Procter & Gamble Pharmaceuticals France SAS. It is recommended that the test be carried out as soon as menstruation is expected. If in doubt about the result, consult your doctor. This in vitro diagnostic medical device is a regulated health product and bears the CE mark. Read the leaflet carefully and seek advice from a healthcare professional. Internal reference number: 17/10/Procter/GP/001. Date of creation: 17 October 2017.
For in vitro diagnostic use only. For in vitro diagnostic use only.Not suitable for internal use. Keep out of reach of Children. Store between 2 and 30°C.If stored in a refrigerator, remove the device and allow it to reach room temperature for 30 minutes before testing.Do not use if the protective sleeve is damaged.Do not use after the expiry date.Dispose of with normal household waste.
Our selection
Reviews
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getReviews, 7.26ms
- REVIEWS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
Questions
- bvseo_sdk, p_sdk, 3.2.1
- CLOUD, getContent, 7.59ms
- QUESTIONS, PRODUCT
- bvseo-msg: HTTP status code of 404 was returned;
