Philips Power Flosser 3000 Dental Jet white

1 Before switching on the device, point the nozzle of the tip towards the washbasin. Press the on/off button on the handle to turn on the Power Flosser. Let the water flow into the sink. Turn off the unit when all the water has drained.

2 Place the tip of the cannula in your mouth.
Lean over the sink and close your lips slightly over the tip of the cannula to to avoid splashing. Open your mouth wide enough for the water to flow into the washbasin.

3 Press the on/off button on the handle
to turn on the Cordless Power Flosser.

4 Once the Cordless Power Flosser is switched on :
Position the cannula tip just above the gum line at a 90° angle.
Note: For the Quad Stream Cannula, gently press the tip
gently so that the tip of the cannula is in contact
contact with the gum line and teeth.
Starting from the back teeth of the upper or lower jaw
or lower jaw, slide the cannula tip along the
along the gum line and pause briefly between each tooth.
a short pause between each tooth.
Continue cleaning the inside (15 seconds) and outside (15 seconds) of the
(15 seconds) and outside (15 seconds) of your teeth, for a total
for a total of 30 seconds per arch.
Note: Don't forget to clean the inside of your teeth.
Quad Stream technology reinvents interdental cleaning.
Removes up to 99.9% of plaque* in the cleaned areas